- Contact:Gabirella Chen
- Tel:86-0510-82692229
- Mob:+8613921515100
- Fax:86-0510-82696667
- Email:gabirella@go2mj.com
- Web:www.chinamjjx.com
- Add:30#of Jingxin road,Wuxi city, Jiangsu province,China
How does a pellet packing gauge work?
Source:[seo:selfurl]Release time:2021-03-23
How does a pellet packing gauge work? What is the working process of particle packing machine? The following particle packaging machine manufacturers will talk to you about this topic.
1. Vacuum: the vacuum chamber is closed, the vacuum pump works, the vacuum chamber starts to vacuum, the vacuum in the bag at the same time, the vacuum gauge pointer. Up to the rated vacuum (relayed by time
The vacuum pump stops working and the vacuum stops. In the vacuum work at the same time, two - position two - way solenoid valve
IDT works, the heat sealed air chamber is vacuum, and the hot pressing frame is kept in place.
2. Heat sealing :IDT is broken, and the outside atmosphere enters the heat sealing chamber through its upper air inlet. The heat sealing chamber is inflated by the pressure difference between the vacuum chamber and the heat sealing chamber, and the upper heat pressing frame is moved down to press the bag mouth. At the same time the heat sealing transformer work, start sealing; At the same time, the time relay 2SJ works, and after a few seconds, the heat seal is finished.
3, return air: two two solenoid valve 2DT, the atmosphere into the vacuum chamber, the vacuum table pointer back to zero, the hot pressing frame rely on the reset spring reset, the vacuum chamber open cover.
4. Circulation: move the above vacuum chamber to another vacuum chamber, that is, enter the next working process, the left and right chambers work alternately, and the cycle repeats.
- Granule packing machine maintenance2021-08-16
- Working principle of particle packing machine2021-08-16
- The advantages of particle packing machine2021-08-16
- Automatic particle packing machine2021-07-28