National Hotline 86-0510-82692229
  • Contact:Gabirella Chen
  • Tel:86-0510-82692229
  • Mob:+8613921515100
  • Fax:86-0510-82696667
  • Email:gabirella@go2mj.com
  • Web:www.chinamjjx.com
  • Add:30#of Jingxin road,Wuxi city, Jiangsu province,China
Product Details Your location: Home > Products > Packing Machine > Vibration-Feeding Packing Machine
Product Name:

Vibration-Feeding Packing Machine

Product Model:
Product Introduction:

Vibration-Feeding Packing Machine


Application:
This packing machine is widely used in metallurgy, mining, coal, building materials, light industry, chemical industry, electricity, food, grains, machinery, commercial industry and others. It can continuously transport and feed the granular and powdery materials into the materials receiving device (weighing hopper). The equipment is latest design with less space covering, debugging simple, and safe working. Compared to other packing machines, it’s with many features such as small size, light weight, simple structure, low power consumption, small abrasion, and can be easily stepless speed adjustment, etc. and it’s suitable for weighing packaging materials of high temperature, corrosive, or breakable materials. Because no rotating parts, it no need lubrication, very easy to use. With PLC control and touch screen human-machine dialogue, the users can freely adjust the process parameters at any time, the operating is more humane and convenient.


Main features:
1. The vibrating machine part adopts seat-mounted installation mode, for the normal feeding, the vibration chute can be installed horizontally or inclined 5-10°. If for high viscosity or poor fluidity materials or fine powder, it can be inclined by 10 -15°.
Installation (adjust the front and rear position height of the supporting springs).

2. The device is set up with the inlet adjusting plate in the vibration chute to adjust the feeding amount and the materials’ pressure on the column of vibration chute.
It’s to ensure the normal amplitude and the feeding amount stability.

3. In the vibration chute outlet, set with material cut-off gate, during vibration feeding, this gate open for starting materials. When vibration feeding stops, immediately close the materials cut-off gate to guarantee there’s no residual materials falling down so as to ensure the accuracy of the balance volume of materials, and also ensure the entire feeding weighing’ accuracy.

4. You can easily adjust variable speeds. and it’s suitable for weighing packaging materials of high temperature, corrosive, or breakable materials.

5. Because no rotating parts, it no need lubrication, no mechanical wearing, maintenance-free, very easy to use.

6. The bags clamping section height can adjusted as per the length of the bags, and the adjustable stroke is 120mm.

7. With PLC control and touch screen human-machine dialogue, the users can freely adjust the process parameters at any time, the operating is more humane and convenient.

Work flow:
Manual bags putting→ materials cut-off gate open → fast feeding →the weight reaches the target feeding value → slow feeding  → get to the set value→ Close material cut-off gate, stop feeding → release the bag → Start the bags conveyor ( automatic stop after 6 seconds or till next bag clamping ) → enter the next cycle.

Main technical data:

 Packing weight
 15~50kg/bag
 Accuracy
 0.5%~0.2%   (it depends on the materials)
 Speed
 250~180bags/h
 Power supply
 5A/220v, 1A/380v,    power consumption ≤ 1kw
 Air source
 0.5~0.6Mpa,  0.02m3/min
 Self weight
 550kg
 Size
 1450(L)×1000(W)×2280(H)mm (without hopper)
 Hopper volume
 160L

Source:[seo:selfurl]
Release time:2016-06-08 00:00:00
RELATED NEWS
RELATED PRODUCT

Copyright© www.chinamjjx.com(Copy link) MJ Machinery Engineering Co., Ltd.

Specially produce:Big bag filling machine,Containerised bagging system,Fine Powder Filling MachineAnd other products, welcome to inquire!

Business circles: 铝合金门窗 硅胶导尿管

Technical Support: Wuxi Dxiang

Scan into mobile web site

QQ

MOB+8613921515100

TEL86-0510-82692229